Universal Laser Systems Laser Platform M-300 Guía para resolver problemas Pagina 57
- Pagina / 100
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
6-4 Maintenance
#2 Mirror
To gain access to the #2 Mirror, the mirror cover must
be removed. Loosen the thumbscrew (it remains
attached to the cover) and lift the cover straight up.
Inspect the #2 Mirror and
clean it only if there is debris
present. To clean the #2
Mirror with a cotton swab,
moisten the cotton swab with
the Lens Cleaning solution
supplied with the laser
system. DO NOT use other
types of cleaners or solutions.
Gently roll the cotton swab
across the mirror once. DO NOT drag the swab or roll
it back and forth as this can scratch the mirror. If the
mirror did not come clean, use a fresh cotton swab and
repeat the procedure. Do not worry about small pieces of lint that come off of the cotton swab.
They will be vaporized as soon as the laser hits it. You can cause more damage to the mirror
by trying to get it off than by leaving it alone.
#3 Mirror and Focus Lens
You must remove the front cover
to the Focus Carriage (1) to gain
access to the #3 Mirror (3) and the
Focus Lens (4). To do this, hold
the front cover (2) with one hand
and with the other hand, remove
the three thumbscrews that attach
the front cover to the Focus
Carriage, and pull the front cover
straight out. You will notice that
the #3 Mirror and the Focus lens
are both mounted to the front
cover.
The #3 Mirror and the Focus lens
are both glued to a metal bracket
and the metal bracket is attached
to the front plate with Phillips head screws. It is not necessary to detach the bracket from either
optic in order to clean them.
I
2
3
4
1) Focus Carriage
2) Front Cover
3) #3 Mirror
4
)
Focus Lens
- 16008 North 81st Street 1
- Scottsdale, AZ 85260 USA 1
- Customer Support Department 1
- Phone: 480-609-0297 1
- Fax: 480-609-1203 1
- By Vince Budetti 2
- All Rights Reserved 2
- Introduction 3
- How To Get Help 3
- Table of Contents 4
- SECTION 6 – Maintenance 5
- Appendices 6
- General Safety 7
- Laser Safety 8
- Safety Labels 8
- SERIAL #: 02500A 9
- DATE : MAY 2000 9
- Safety Label Locations 10
- EU Compliance (CE) 11
- FCC Compliance 12
- Installation 13
- Exhaust Requirements 14
- Laser Cooling Requirements 15
- Assembling the Laser 16
- Laser Cartridge Installation 17
- Computer Requirements 19
- Making the Connections 19
- Problem Prevention 20
- System Operation 21
- UPDOWNSTOPSTART 22
- Computerized Controls 27
- Printer Driver Controls 28
- Power / Speed 29
- % Power 29
- % Speed 29
- 2.0” Lens 30
- 1000 DPI 31
- Add Shoulder 32
- Print Negative 32
- Mirror Image 32
- Graphics 33
- Tuning Tab 34
- Vector Scaling 36
- Upgrading the Printer Driver 37
- Upgrading the Firmware 37
- Software Suggestions 38
- General Software Setup 38
- Page Setup 39
- Ruler Setup 39
- Outlines and Fills 40
- Image Processing Order 41
- Overlapping Fills 41
- Overlapping Outlines 41
- Speed Optimizing 42
- Postscript (PS) Images 42
- Font Requirements 43
- CorelDRAW 8 44
- CorelDRAW 9 45
- Software Setup – AutoCAD 46
- Using the Laser System 49
- Step-by-Step 49
- Focusing 50
- Printing to the Laser System 51
- Maintenance 54
- System Cleaning 56
- Optics Cleaning 56
- Z-axis Table Removal 58
- Exhaust Plenum Cleaning 59
- Adjustments and Lubrication 59
- Electronic Upgrading 59
- Battery Replacement 60
- Cooling Fan Filters 60
- Maintenance Schedule 61
- Material Applications 62
- Materials 63
- Sample Materials 7-5 66
- Sample Materials 7-7 68
- Sample Materials 7-9 70
- MALE FEMALE 73
- Sample Materials 7-13 74
- Sample Materials 7-15 76
- Sample Materials 7-17 78
- Sample Materials 7-19 80
- Sample Materials 7-21 82
- Sample Materials 7-23 84
- BLACK FILLED BOX 85
- MIRRORED IMAGE 85
- LASER ENGRAVING TABLE 86
- Bitmapped or Scanned Images 87
- Monochrome Bitmaps 88
- Grayscale Bitmaps 88
- Color Bitmaps 89
- Focus Lens Kits 91
- APPENDIX 93
- Appendix B - Specifications 95
- Engraving Quality 96
- Operational 99
- Appendix D - How To Get Help 100
Relacionado con productos y manuales para Niveles Láser Universal Laser Systems Laser Platform M-300
(14 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales