Universal Laser Systems Laser Platform M-300 Guía para resolver problemas descargar pdf (Pagina 17)

Close-up view of small notch

Installation 2-5

Laser Cartridge Installation

• With your finger, press the circular button on

the latch and it will pop out.

• G

ently fold the rear cover up and over the top

door. Visually locate the two Mounting

Blocks, the Laser Latch, and the Alignment

Fork. Locate the small notch in the Alignment

Fork.

• Observe the “V” groove along the upper and

lower part of the Laser Cartridge. Also locate

the Alignment Plate at the end of the Laser

Cartridge.

• Pick up the Laser Cartridge by the sides. Tilt

the Laser Cartridge downward on a 30-

degree angle. Mount the cartridge onto the

Mounting Blocks by placing the upper “V”

groove of the cartridge on top of the

Mounting Blocks. Slide the cartridge to the

right until the Alignment Plate of the Laser

Cartridge makes contact with the inside of

the large protruding plate of the Alignment

Fork (next page).

1) Mounting Blocks

2) Laser Latch

3) Alignment Fork

1) Upper V-groove

2) Lower V-groove

3) Alignment Plate

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 99 100

Sin comentarios

Universal Laser Systems Laser Platform M-300 Guía para resolver problemas Pagina 17