Universal Laser Systems Laser Platform M-300 Guía para resolver problemas descargar pdf (Pagina 47)

100

Computerized Controls 4-21

Pen Colors

It is recommended that line and text color be set to any of seven colors within the ULS Printer

Driver (black, red, green, yellow, blue, cyan, and magenta). These colors correspond to the

AutoCAD standard colors assigned to pens 1 through 7. Colors can easily be changed or

checked using the DDMODIFY command. AutoCAD White color corresponds to ULS Black

color. Any other colors may cause errors during engraving/cutting. If other pen colors are used,

the ULS printer driver will try to match the color that most resembles the pen color used,

although some colors may not be recognized at all.

Printer Setup

Open AutoCAD or AutoCAD LT. Select CANCEL if the Start Up window appears. Select FILE

then PRINTER SETUP at which time a Preferences Window will appear. Select NEW, then

highlight (single click) System Printer ADI 4.3 – by Autodesk, Inc and type in a printer name (C-

200 for example) in the Add a description box, then select OK. A window should appear named

AutoCAD System Printer Configuration. There are three boxes in this window. Default to

Control Panel Settings, Allow Dithered Output and Update Pen Table on Device Change. ALL

three boxes should be DESELECTED. After which, select OK. The AutoCAD Text Window will

then appear and ask if you want to change anything. Type N and press the ENTER key. The

Preferences Window will appear. Select OK. You have completed the set up portion for our

printer.

Printing Files From AutoCAD

The ULS Printer Driver can be accessed through the PRINT command. Select Device and

Default Selection and select the printer that was just set up. Select CHANGE… (under Device

Requirements) and then Properties. The only way to consistently print properly is to access the

ULS Print Driver every time you print a file (even if you do not change any settings) and select

OK when exiting. It is also necessary to check (and possibly modify) pen widths within the Pen

Parameters settings window. From the Print/Plot Configuration window select PEN

ASSIGNMENTS. Set pen widths to 0.001 inches for vector output or above 0.008 for raster

output.

For output viewing and proper printing, select WINDOW… then adjust the coordinates to top

line (0,0) and bottom line (16, 12) then OK. AutoCAD cannot plot the entire field. It will lose

0.07” on both X-axis and Y-axis. We have not determined why this is so, although it may be

due to a page border default setting that we have not been able to modify. To preview file,

select "FULL" then "PREVIEW" before selecting "OK". Previewing the print file is recommended

before printing. To print file select OK.

Objects that are moved from outside the (X0,Y0) - (X16,Y12) area:

It has been experienced that some objects moved into the 16 x 12 area will not print correctly. If

objects are moved, the first step when running into printing problems is to see the full print

preview of the file. If there are printing problems, generally it is due to objects outside of the

printing area. This problem can be identified by picking the print window coordinates (using

PICK, after clicking on the Window… box) and by drawing a box around the objects that are to

be printed, then looking at the actual coordinates that AutoCAD has chosen for the print

window.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 99 100

Comentarios a estos manuales

Sin comentarios

Universal Laser Systems Laser Platform M-300 Guía para resolver problemas Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Niveles Láser Universal Laser Systems Laser Platform M-300