Universal Laser Systems CLP-100NI-NPRT Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
34
MAINTENANCE
8- Reinstall the Index Ramp in the proper orientation for your mounting configuration as shown in
Figures 64 & 65.
1- To replace Print Drum Index Springs, rotate the Print Drum approximately 3/4 turn to relieve spring
tension as shown in Figure 59, Page 32.
REPLACING PRINT DRUM INDEX SPRINGS
2- Using a small screwdriver, remove the two Snap Rings on
the Index Spring Assembly.
3- Remove the Index Spring Assembly by lifting it straight up off
the pivot pins.
FIGURE 66
FIGURE 67
FIGURE 64
FIGURE 65
RIGHT HAND CONFIGURATION
LEFT HAND CONFIGURATION
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 44 45

Comentarios a estos manuales

Sin comentarios